DS 3: In the event of a breakdown

Bodywork and Leather

Bodywork High-gloss paint Do not use abrasive products, solvents, petrol or oil to clean the bodywork. Never use an abrasive sponge to clean stubborn stains - risk of scratching the paintwork! Do not apply polish in strong sunshine, or to plastic or rubber parts...

Warning triangle

This reflective and dismantlable device is to be installed on the side of the road when a vehicle is broken down or damaged. Before getting out of the vehicle Turn on the hazard warning lamps, then put on the safety vest to assemble and install the triangle...

Other information:

DS 3 2016-2026 Owners Manual: Changing a fuse

Before changing a fuse: Identify the cause of the fault and fix it. Switch off all power consumption. Immobilise the vehicle and switch off the ignition. Identify the defective fuse using the current allocation tables and diagrams. To replace a fuse, it is essential to: Use the special tweezers to extract the fuse from its housing and check the condition of its filament...

DS 3 2016-2026 Owners Manual: Checking/adjusting tyre pressures

The compressor can be used, without injecting sealant, to check and, if necessary, adjust the tyre pressures. Remove the valve cap from the tyre and keep it in a clean place. Uncoil the pipe stowed under the compressor. Screw the pipe onto the valve and tighten firmly...