DS 3: In the event of a breakdown / Spare wheel
DS 3 2016-2025 Owners Manual
Scan the QR Code on page 3
to view
explanatory videos.
For more information on
the Tool kit, refer
to the corresponding section.
The compressor can be used, without injecting
sealant, to check and, if necessary, adjust the
tyre pressures.
Remove the valve cap from the tyre and keep it
in a clean place...
The spare wheel is stored under the boot carpet.
The spare wheel is a
‘space-saver’ wheel.
Removing the spare wheel
Slacken the central nut.
Remove the fastening device (nut and bolt)...
Other information:
Preparing for the manoeuvre
Move very slowly until the request to stop
the vehicle and the "STOP" sign are displayed,
accompanied by an audible signal.
Once the vehicle has stopped, an instructions
page is displayed on the screen.
To prepare for the manoeuvre, you must fulfil
all of these instructions...
If the situation requires a change of headlamp
beam, the driver can take over at any time.
Switch the headlamps manually between
dipped and main beam to pause the function.
If the "AUTO" and "Dipped beam" indicator lamps
were on, the system changes to main beam...