DS 3: Ease of use and comfort / Front seats
DS 3 2016-2026 Owners Manual
Before moving the seat backwards,
ensure that there is no person or object
that might prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or of
jamming the seat if large objects are placed on
the floor behind the seat.
For
safety reasons, adjustments must
only be made when the vehicle is
stationary.
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
head restraint height...
Longitudinal
Raise the control bar and slide the seat
forwards or backwards.
Release the control bar to lock the seat in
position on one of the notches...
Other information:
Vehicle detected by the system (full symbol)
Cruise control active (colour not grey)
Speed setting value
Speed suggested by the Speed Limit
Recognition and Recommendation
Vehicle held stationary (versions with
automatic gearbox or drive selector)
Inter-vehicle distance setting
Position of the vehicle detected by the
system
..
Before operating the wipers in wintry
conditions, clear any snow, ice or frost
from the windscreen and around the wiper
arms and blades.
Do not operate the wipers
on a dry
windscreen. In extremely hot or cold
weather, check that the wiper blades are not
stuck to the windscreen before operating the
wipers.
After
using an automatic car wash, you
may temporarily notice abnormal noises
..