DS 3 Manuals

DS 3: Technical data / Engine technical data and towed loads

DS 3 2016-2025 Owners Manual

Engines

The engine characteristics are given in the vehicle's registration document, as well as in sales brochures.

Only the values available at the time of publication are presented in the tables.

Contact a dealer or a qualified workshop to obtain missing values.

DS 3. Engine technical data and towed loads The maximum power corresponds to the value type-approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).

For more information, contact a dealer or a qualified workshop.

Weights and towed loads

The weights and towed loads relating to the vehicle are indicated on the registration document, as well as in sales brochures.

These values are also indicated on the manufacturer's plate or label.

For more information, contact a dealer or a qualified workshop.

The GTW (Gross Train Weight) and towed load values indicated are valid up to a maximum altitude of 1,000 metres. The towed load value must be reduced by 10% for each additional 1,000 metres of altitude.

The maximum authorised nose weight corresponds to the weight permitted on the towball.

DS 3. Engine technical data and towed loads When exterior temperatures are high, the vehicle performance may be limited in order to protect the engine. When the exterior temperature is higher than 37°C, reduce the towed weight.

DS 3. Engine technical data and towed loads Towing even with a lightly loaded vehicle can adversely affect its road holding. Braking distances are increased when towing a trailer.

When using a vehicle to tow, never exceed a speed of 62 mph (100 km/h) (observe the local legislation in force).

 

 

    Technical data

    ..

    Petrol engines. Diesel engines. Electric motor

    Petrol engines Diesel engines Electric motor ..

    Other information:

    DS 3 2016-2025 Owners Manual: Fitting a wheel


    Fitting a steel or "space-saver" type spare wheel If the vehicle is fitted with alloy wheels, the washers A do not make contact with the steel or "space-saver" type spare wheel. The wheel is held in place by the conical contact surface B of each bolt. Fit the wheel on the hub. Screw in the bolts by hand as far as possible. Pre-tighten the security bolt using the wheelbrace 5 equippe..

    DS 3 2016-2025 Owners Manual: Correct driving position


    For safety reasons, adjustments must only be made when the vehicle is stationary. Before taking to the road and to make the most of the ergonomic layout of the instruments and controls, carry out these adjustments in the following order: head restraint height. seat backrest angle. seat cushion height. longitudinal seat position. steering wheel height and reach. rear view mirror and d..

    Categories

    Selector

    DS 3. Selector

    Switching on Switching off (long press) Brightness adjustment Display height adjustment

    read more

    Copyright © 2025 www.ds3manuals.com