DS 3 Manuals

DS 3: Head-up display / Display in operation

DS 3 2016-2025 Owners Manual

DS 3. Display in operation

Once the system has been activated, the following information is grouped together in the head-up display:

  1. The speed of the vehicle.
  2. Cruise control/speed limiter information and, if the vehicle is so equipped, the Road signs recognition function.
  3. If the vehicle is so equipped, inter-vehicle distance information, lane departure warning system information, lane positioning assist information, and automatic emergency braking alerts.
  4. If the vehicle is so equipped, navigation information.

DS 3. Display in operation For more information about Navigation, refer to the sections describing the audio and telematics systems.

    Head-up display

    System which projects various information onto a transparent blade placed in the driver's field of vision to avoid the driver having to take their eyes off the road...

    Selector

    Switching on Switching off (long press) Brightness adjustment Display height adjustment Activation/Deactivation With the engine running, press button 1 to activate the system and deploy the projection blade...

    Other information:

    DS 3 2016-2025 Owners Manual: Daytime running lamps / Sidelamps


    The front and rear lamps light up automatically when the engine starts. They provide the following functions: Daytime running lamps (lighting control stalk in the "AUTO" position with adequate light level). Sidelamps (lighting control stalk in the "AUTO" position with low light levels or "Sidelamps only” or "Dipped/main beam headlamps")...

    DS 3 2016-2025 Owners Manual: Switching on the ignition without starting the engine.  Key not detected. Emergency switch-off


    Switching on the ignition without starting the engine With the electronic key in the passenger compartment, pressing the "START/STOP" button, without depressing any of the pedals, allows the ignition to be switched on without starting the engine. Press this button again to switch off the ignition and allow the vehicle to be locked...

    Categories

    Remote control function

    DS 3. Remote control function

    The remote control can be used for the following remote functions, depending on version:

    Unlocking/Locking/Deadlocking the vehicle. Unlocking/Locking the boot. Folding/Unfolding the door mirrors. Folding/Unfolding the exterior door handles. Activating/Deactivating the alarm. Locating the vehicle. Closing the windows. Activating the vehicle’s electronic immobiliser.

    read more

    Copyright © 2025 www.ds3manuals.com