DS 3: Practical information / Advice on care and maintenance
DS 3 2016-2025 Owners Manual
In certain situations, it is necessary to put the
vehicle into free-wheeling mode (e.g. towing, on
a rolling road, automatic car wash (Wash mode),
rail or sea transport)...
Observe the following recommendations to avoid
damaging the vehicle.
Exterior
Never use a high-pressure
jet wash in the
engine compartment - risk of damaging
the electrical components!
Do not wash the vehicle in bright sunshine or
extremely cold conditions...
Other information:
If the situation requires a change of headlamp
beam, the driver can take over at any time.
Switch the headlamps manually between
dipped and main beam to pause the function.
If the "AUTO" and "Dipped beam" indicator lamps
were on, the system changes to main beam...
The electrical traction system, which operates at
a voltage of approximately 400 V, is identified by
orange cables, and its components are marked
with this symbol:
An electric vehicle’s
power train can
become hot during use and after
switching off the ignition...